There were several important developments over the weekend that could influence the activity at the start of the new week.
First, Australia drove out the Labor government, with its largely self-inflicted wounds, and gave the Liberal/National coalition what appears to be the largest parliamentary majority since 1996. The new government is committed to cutting spending and taxes, especially the carbon/mining levies. This potential, coupled with what many see as a shift in the central bank's stance, is creating an attractive opportunity for investors. The calculus for direct investment in the mining sector may change and the rise in interest rates is creating interesting carry opportunities. The one-year note offered the best yield in nearly two months (~2.5%) on the eve of the election and the Australian dollar had its highest close since Aug. 9. The speculative community is short, leaving room for a further short squeeze.
Second, China reported a larger-than-expected August trade surplus of $28.6 billion (vs. consensus estimate of ~$20 billion). Exports rose 7.2% from a year ago (vs. consensus estimate of 6%), while imports rose 7% (vs. consensus 11.3%). Export strength as seen in electronics, textiles and machinery. Exports to ASEAN countries rose 30.8% (year over year). Exports to the U.S. rose 6.1% (compared with 5.3% in July). Exports to the EU rose 2.5%, roughly the same as the July pace and consistent with the modest recovery seen in the PMI data. On the other hand, exports to Japan slowed for the seventh consecutive month.
Top 10 Machinery Stocks To Invest In Right Now: Giga-tronics Inc (GIGA)
Giga-tronics Incorporated (Giga-tronics), incorporated on March 5, 1980, includes the operations of the Giga-tronics Division and Microsource Inc. (Microsource), a wholly owned subsidiary. Giga-tronics Division designs, manufactures and markets a line of test and measurement equipment used in the development, test and maintenance of wireless communications products and systems, flight navigational equipment, electronic defense systems and automatic testing systems. These products are used primarily in the design, production, repair and maintenance of commercial telecommunications, radar, and electronic warfare equipment. The Company manufactures products used in test, measurement and control. The Company has two segments: Giga-tronics Division and Microsource. In April 2013, it completed the sale of its product line known as SCPM to Teradyne, Inc.
Giga-tronics
The Giga-tronics Division produces signal sources, generators and sweepers, and power measurement instruments for use in the microwave and radio frequency (RF) range (10 kilohertz (kHz) to 50 gigahertz (GHz)). Within each product line are a number of different models and options allowing customers to select frequency range and specialized capabilities, features and functions. The end-user markets for these products can be divided into three segments: commercial telecommunications, radar and electronic warfare. These instruments are used in the design, production, repair and maintenance and calibration of other manufacturers' products, from discrete components to complex systems.
The Giga-tronics Division also produces switch modules and interface adapters that operates with a bandwidth from direct current (DC) to optical frequencies. These switch modules may be incorporated within its customers' automated test equipment. The end-user markets for these products are primarily related to defense, aeronautics, communications, satellite and electronic warfare, commercial aviation and semiconductors.
The Microsource segment develops and manufactures a broad line of yttrium, iron, garnet (YIG) tuned oscillators, filters and microwave synthesizers, which are used by its customers in operational applications and in manufacturing a variety of microwave instruments or devices.
Giga-tronics competes with Agilent, Anritsu, EADS, Aeroflex and Rohde & Schwarz.
Advisors' Opinion:- [By Monica Gerson]
Giga-tronics (NASDAQ: GIGA) dropped 14.84% to $1.32. Giga-tronics' trailing-twelve-month profit margin is -30.58%.
MER Telemanagement Solutions (NASDAQ: MTSL) dropped 14.62% to $2.09 after the company terminated MVNE solution provider agreement with SBC Communications.
Top 10 Machinery Stocks To Invest In Right Now: Toro Co (TTC)
The Toro Company (Toro), incorporated on November 7, 1983, designs, manufactures, and markets professional turf maintenance equipment and services, turf irrigation systems, agricultural micro-irrigation systems, landscaping equipment and lighting, and residential yard and snow removal products. The Company operates in three business segments: Professional, Residential, and Distribution. Its products are advertised and sold at the retail level under the names of Toro, Exmark, Irritrol, Hayter, Pope, Lawn-Boy and Lawn Genie. In October 2013, the Company acquired Xiamen Xiangfeng Water Saving Equipment Co., Ltd.
Professional
The Company designs professional turf, landscape, and agricultural products and markets them worldwide through a network of distributors and dealers, as well as directly to Government customers, rental companies, and retailers. These channel partners then sell its products to professional users engaged in creating and renovating landscapes, irrigating turf and agricultural fields, and maintaining turf, such as golf courses, sports fields, municipal properties, and residential and commercial landscapes.
Landscape Contractor Market
The Company market products to landscape contractors under the Toro and Exmark brands. Products for the landscape contractor market include zero-turn radius riding mowers, heavy-duty walk behind mowers, mid-size walk behind mowers, stand-on mowers, and turf renovation and tree care equipment. It also offers some products with electronic fuel injection engine options. In fiscal 2013, it enhanced its line of Toro Z Master Commercial 3000 Series mowers, featuring its TURBO FORCE cutting deck, integrated pump, and wheel motors designed for professional results, performance, and dependability. In addition, in fiscal 2013, it introduced the new Exmark Vantage X-Series stand-on mower.
Sports Fields and Grounds Market
Products for the sports fields and grounds market include riding rotar! y mowers and attachments, aerators, and debris management products, which include versatile debris vacuums, blowers, and sweepers. Other products include multipurpose vehicles, such as the Toro Workman, that can be used for turf maintenance, towing, and industrial hauling. These products are sold through distributors, who then sell to owners and/or managers of sports fields, Governmental properties, and residential and commercial landscapes.
Golf Course Market
The Company�� products for the golf course market include large reel and rotary riding products for fairway, rough and trim cutting; riding and walking mowers for putting greens and specialty areas; greens rollers; turf sprayer equipment; utility vehicles; aeration equipment; and bunker maintenance equipment. In fiscal 2013, it introduced the Reelmaster 3550-D, which features a productive 82 inch cutting width, enhanced ground-following capability with turf-friendly tires, and three-wheel drive system designed for traction in hilly and wet conditions. In addition, in fiscal 2013, it began offering versions of its golf products which are compliant with Tier 4 diesel engine emission requirements. It also manufacture and market underground irrigation systems for the golf course market, including sprinkler heads, controllers, turf sensors, and electric, battery-operated, and hydraulic valves. Its 835S/855S Series golf sprinklers are equipped with a unique TruJectory feature that provides enhanced water distribution control. Its Turf Guard wireless soil monitoring systems are designed to measure soil moisture, salinity, and temperature through buried wireless sensors that communicate through an Internet server for processing and presentation to a user through the Web.
Residential/Commercial Irrigation and Lighting Market
Turf irrigation products marketed under the Toro and Irritrol brands include rotors; sprinkler bodies and nozzles; plastic and brass valves; drip tubing and subsurface irrigation; ! electric ! and hydraulic control devices; and wired and wireless rain, freeze, and climate sensors. These products are designed to be used in residential and commercial turf irrigation systems that are installed into new systems or used to replace or retrofit existing systems. Most of the product lines are designed for underground automatic irrigation. Electric and hydraulic controllers activate valves and sprinkler bodies and nozzles in a typical irrigation system. Its retail irrigation products are marketed under the Toro and Lawn Genie brand names. These products are designed for homeowner installation and include sprinkler heads, valves, timers, and drip irrigation systems. Its ECXTRA sprinkler timers can be used with a home computer and its Scheduling Advisor recommends the proper watering schedule based on the local weather, plant type, and sprinkler. It manufactures and market lighting products under the Unique Lighting Systems brand name.
Micro-Irrigation Market
Products for the micro-irrigation market include products that regulate the flow of water for drip irrigation, including Aqua-Traxx PBX drip tape, Aqua-Traxx PC (pressure-compensating) drip tape, Blue Stripe polyethylene tubing, BlueLine drip line, and NGE emitters, all used in agriculture, mining, and landscape applications. In addition to these products, it offers control devices and connection options. These products are sold primarily through dealers and distributors who then sell to end users for use primarily in vegetable fields, fruit and nut orchards, vineyards, landscapes, and mines. In fiscal 2013, it expanded its product offering of the Neptune thinwall dripline into the North America market, featuring a medium-durability dripline that enables growers to install a subsurface drip irrigation system designed to last for up to ten years and to allow growers of medium-length crops to adopt drip irrigation. In addition, in fiscal 2013, it introduced AquaFlow 3.2 Drip Irrigation Design Software, a new software packag! e used to! help design drip irrigation systems.
Rental and Construction Market
The Company offers over 35 attachments for our compact utility loaders, including trenchers, augers, vibratory plows, and backhoes. In fiscal 2013, it launched the STX-38 Stump Grinder featuring high maneuverability and hydraulic sweep control. Products for the rental market include compact utility loaders, walk-behind trenchers, stump grinders, and turf renovation products, many of which are also sold to landscape contractors. Its presence in the construction market is driven by an equipment line of vibratory plows, trenchers, and horizontal directional drills, all of which are used in the installation, repair, and replacement of underground utilities with minimal impact on surrounding landscapes or structures. In fiscal 2013, it introduced the Toro Pro Sneak Vibratory Plow that delivers consistent and powerful plowing in a compact, maneuverable package.
Residential
The Company markets its residential products to homeowners through a variety of distribution channels, including outdoor power equipment dealers, hardware retailers, home centers, mass retailers, and over the Internet. These products are sold mainly in North America, Europe, and Australia, with the exception of snow removal products that are sold primarily in North America and Europe.
Walk Power Mower Products
The Company manufactures and markets a number of walk power mower models under its Toro and Lawn-Boy brand names, as well as the Pope brand in Australia and the Hayter brand in the United Kingdom. Toro also offers a line of rear-roller walk power mowers, a design that provides a striped finish, for the United Kingdom market.
Riding Products
The Company manufactures and markets riding products under the Toro brand name worldwide and under the Hayter brand name in the United Kingdom. Riding products primarily consist of zero-turn radius mowers. Lawn and garden tra! ctor mode! ls are sold worldwide. In addition, its rear engine and direct-collect riding mowers are manufactured and sold in the European market. A number of models are available with a variety of engines, decks, transmissions, and accessories.
Home Solutions Products
Toro designs and markets home solutions products under the Toro and Pope brand names, including electric and battery-operated grass trimmers, electric blower-vacuums, electric blowers, and electric snow throwers. In Australia, the Company also designs and markets underground and hose-end retail irrigation products under the Pope brand name.
Gas Snow Removal Products
The Company manufactures and markets a range of gas-powered single-stage and two-stage snow thrower models. Single-stage snow throwers are walk behind units with lightweight two- and four-cycle gasoline engines. Its two-stage snow throwers are designed for large areas of deep, heavy snow and use four-cycle engines. The Company�� two-stage snow throwers include a line of models featuring the Power Max auger system and the Quick Stick chute control technology.
Advisors' Opinion:- [By Rich Duprey]
Consumer landscape equipment maker�Toro� (NYSE: TTC ) �announced yesterday its second-quarter dividend of $0.14 per share, the same rate it paid the past two quarters after raising the payout 27% from $0.11 per share.
5 Best Dow Dividend Stocks To Buy Right Now: Mueller Water Products Inc (MWA)
Mueller Water Products, Inc., incorporated on September 22, 2005, is a manufacturer and marketer of products and services used in the transmission, distribution and measurement of water. The Company�� product portfolio includes engineered valves, fire hydrants, pipe fittings, water meters, leak detection and pipe condition assessment which are used by municipalities, as well as the residential and non-residential construction industries. The Company operates in two segments: Mueller Co. and Anvil. Mueller Co. The Company�� valve or fire hydrant products are specified for use in the 100 metropolitan areas in the United States.
Mueller Co.
Mueller Co. manufactures valves for water and gas systems, including iron gate, butterfly, tapping, check, plug and ball valves, as well as dry-barrel and wet-barrel fire hydrants and a of pipe repair products, such as clamps and couplings used to repair leaks. The Company offers residential and commercial metering products and systems and leak detection and pipe condition assessment products and services. Mueller Co. products are sold through waterworks distributors.
The Company�� fire hydrants consist of an upper barrel and nozzle section and a lower barrel and valve section that connects to a water main. In dry-barrel hydrants, the valve connecting the barrel of the hydrant to the water main is located below ground at or below the frost line, which keeps the hydrant upper barrel dry. It sells dry-barrel fire hydrants with the Mueller and U.S. Pipe Valve and Hydrant brand names in the United States and the Mueller and Canada Valve brand names in Canada. The Company also makes wet-barrel hydrants, where the valves are located in the hydrant nozzles and the barrel contains water at all times. It also makes wet-barrel hydrants, where the valves are located in the hydrant nozzles and the barrel contains water at all times.
Mueller Co. manufactures a variety of intelligent water technology products under the Mue! ller Systems and Hersey Meters brand names that are designed to help water providers accurately measure water usage. These products include water meters, advanced metering infrastructure systems and automated meter reading products, have the capability to measure water usage ranging from small residential flows to large commercial and industrial applications.
Mueller Co. offers leak detection and pipe condition assessment products and services under the Echologics brand name. Other products include pipe repair products, such as clamps and couplings used to repair leaks and municipal castings, such as manhole covers and street drain grates. It sells these products under the Mueller and Jones brand names.
The Company competes with McWane, Inc., American Cast Iron Pipe Company, The Ford Meter Box Company, Inc., A.Y. McDonald Mfg, Sensus, Neptune Technology Group, Inc., Badger Meter, Inc., Aclara LLC and Itron, Inc.
Anvil
Anvil manufactures and sources a range of products, includes fittings, couplings, hangers, valves and related products for use in many non-residential constructions for HVAC, fire protection, energy and oil and gas applications. Anvil's products are sold through distributors who then sell the products to a variety of end users. These distributors are serviced primarily through Anvil's distribution centers.
Fittings and Couplings manufactures threaded and grooved pipe fittings and couplings. Pipe fittings and couplings join two pieces of pipe together. The five categories of pipe fittings and couplings are cast iron fittings, malleable iron fittings and unions, grooved fittings, couplings and valves, threaded steel pipe coupling and nipples. Hangers, manufacture an array of pipe hangers and supports. Standard pipe hangers and supports are used in fire protection sprinkler systems and HVAC applications where the objective is to provide rigid support from the building structure.
The Company competes with Ward Man! ufacturin! g L.L.C., malleable iron fittings, Victaulic Company, Tyco International Ltd., ERICO International Corporation, Cooper Industries plc and Carpenter & Paterson, Inc.
Advisors' Opinion:- [By Travis Hoium]
What: Shares of Mueller Water Products (NYSE: MWA ) jumped as much as 17% today after the company released earnings.
So what: Fiscal-second-quarter revenue jumped 12.6% to $283.1 million and net income was $6.2 million, or $0.05 per share. Analysts only expected revenue to be $270.8 million and earnings of $0.02 per share so this was well ahead of estimates. �
Top 10 Machinery Stocks To Invest In Right Now: Volvo AB (VOLVY)
AB Volvo is a supplier of commercial transport solutions providing products, such as trucks, buses, construction equipment, engines and drive systems for boats and industrial applications, as well as aircraft engine components. The Company also offers its customers financial solutions. The Company operates in six segments: Trucks, Buses, Construction Equipment, Volvo Penta, Volvo Aero and Financial Services. The business units include Volvo 3P, Volvo Powertrain, Volvo Parts, Volvo Logistics, Volvo Business Services, Volvo Information Technology (IT), Volvo Real Estate and Volvo Technology. During the year ended December 31, 2009, AB Volvo acquired all shares in Volvo Logistics AB from Fortos Ventures AB. In April 2014, the Company announced that it has completed the sale of commercial real estate. In June 2014, the Company acquired Terex's hauler business.
The Company�� truck operations consist of Volvo Trucks, Renault Trucks, UD Trucks, Mack Trucks and VE Commercial Vehicles (50%) in India. The product offer stretches from heavy-duty trucks for long-haulage and construction work to light-duty trucks for distribution. Volvo Trucks, Renault Trucks, UD Trucks, Mack Trucks and Eicher offer customers a range of products and services for transports.
The Buses has a product range consisting of city and intercity buses, coaches and chassis. Volvo Buses��product line includes complete buses and bus chassis for city, intercity and coach traffic. The Company has a total offering that, in addition to buses, includes a service network, spare parts handling, service and repair contracts, financial services and traffic information systems.
The Company�� construction equipment manufactures equipment for construction applications and related industries. Volvo Construction Equipment develops, manufactures and markets equipment for construction and related industries. Its products include a range of wheel loaders, hydraulic wheeled and crawler excavators, articulated haule! rs, road machinery and a range of compact equipment.
The Company�� Volvo Penta offers engines and drives systems for leisure and commercial boats and for industrial applications, such as gensets and materials handling. Volvo Penta manufactures engines and drive systems for marine applications, for both leisure and commercial craft, with an engine range of 10 to 1,200 horse power and has a global service network with approximately 5,000 dealers. Volvo Penta also supplies industrial engines ranging from 75 kilowatts to 600 kilowatts for irrigation pumps, generator units and other application areas.
The Company�� Volvo aero offers advanced components for aircraft engines and space applications with a focus on lightweight technology for reduced fuel consumption. Volvo Aero specializes in a number of highly advanced components for aircraft engines and space rockets.
The Company�� financial services segment conducts operations in customer and dealer financing. It offers financial services, such as customer and dealer financing and other Services, such as insurance contribute to create customer value. It provides financing solutions and other services in retaining customers and attracting new ones to the Company.
The Company competes with Daimler, Paccar, Navistar, MAN, Scania, Caterpillar, Komatsu, Cummins and Brunswick.
Advisors' Opinion:- [By Rich Smith]
The Department of Defense awarded Sweden's Volvo AB (NASDAQOTH: VOLVY ) -- or more specifically, Volvo's Mack Trucks subsidiary -- a $177.5 million contract Friday for the purchase of tractor trailers.
Top 10 Machinery Stocks To Invest In Right Now: IDEX Corp (IEX)
IDEX Corporation (IDEX), incorporated on September 24, 1987, is an applied solutions business that sells an array of pumps, flow meters and other fluidics systems and components and engineered products to customers in a variety of markets worldwide. All of the Company�� business activities are carried out through wholly owned subsidiaries. IDEX operates in three business segments: Fluid & Metering Technologies, Health & Science Technologies and Fire & Safety/Diversified Products. Reporting units in the Fluid & Metering Technologies segment consist of Banjo; Energy and Fuels (Energy); Chemical, Food & Process (CFP) and Water & Waste Water (Water). Reporting units in the Health & Science Technologies segment consist of IDEX Health & Science (IH&S); IDEX Optics and Photonics (IOP); Precision Polymer Engineering (PPE); Gast; Micropump and Materials Process Technologies (MPT). Reporting units in the Fire & Safety/Diversified Products segment consist of Fire Suppression; Rescue Tools and Band-It. In July 20, 2012, it acquired Matcon Group Limited. In March 2013, it announced the acquisition of FTL Seals Technology, Ltd. On April 11, 2012, the Company acquired the stock of PPC. On April 30, 2012, the Company acquired the stock of ERC.
Fluid & Metering Technologies Segment
The Fluid & Metering Technologies Segment designs, produces and distributes displacement pumps, flow meters, injectors, and other fluid-handling pump modules and systems and provides flow monitoring and other services for the water and wastewater industries. Fluid & Metering Technologies pump and metering solutions serve a range of end markets, including industrial infrastructure (fossil fuels, refined and alternative fuels, and water and wastewater), chemical processing, agricultural, food and beverage, pulp and paper, transportation, plastics and resins, electronics and electrical, construction and mining, pharmaceutical and bio-pharmaceutical, machinery and other markets. Fluid & Metering Technologies accounte! d for 43% of IDEX�� sales and 82% of IDEX�� operating income, with approximately 46% of its sales to customers outside the United States as of December 31, 2012, with approximately 46% of its sales to customers outside the United States. Banjo is a provider of pumps, valves, fittings and systems used in liquid handling. Banjo is based in Crawfordsville, Indiana and its products are used in agricultural and industrial applications. Approximately 11% of Banjo�� sales during 2012 were to customers outside the United States.
Energy consists of the Company�� Corken, Faure Herman, Liquid Controls, S.A.M.P.I. and Toptech businesses. Energy is a supplier of flow meters, electronic registration and control products, rotary vane and turbine pumps, reciprocating piston compressors, and terminal automation control systems. Energy has facilities in Longwood, Florida and Zwijndrech, Belgium (Toptech products), Oklahoma City, Oklahoma (Corken products), La Ferte Bernard, France (Faure Herman products), Vadodara, Gujarat, India (Liquid Controls products), and Altopascio, Italy (S.A.M.P.I. products). Applications for Liquid Controls and S.A.M.P.I. positive displacement flow meters, electronic, registration and control products include mobile and stationary metering installations for wholesale and retail distribution of petroleum and liquefied petroleum gas, aviation refueling, and industrial metering and dispensing of liquids and gases. Corken products consist of rotary vane pumps, single and multistage regenerative turbine pumps, and small horsepower reciprocating piston compressors. Toptech supplies terminal automation hardware and software to control and manage inventories, as well as transactional data and invoicing, to customers in the oil, gas and refined-fuels markets. Faure Herman is a supplier of ultrasonic and helical turbine flow meters used in the custody transfer and control of fluids and gases. Approximately 53% of Energy�� sales during 2012 were to customers outside the United State! s.
!
CFP consists of the Company�� Richter, Viking and Warren Rupp businesses. CFP is a producer of air-operated and motor-driven double-diaphragm pumps and replacement parts, lined pumps, valves and control equipment for the chemical, fine chemical and pharmaceutical industries, and external gear pumps. Richter�� corrosion resistant fluoroplastic lined products offer solutions for applications in the process industry. Viking�� products consist of external gear pumps, strainers and reducers, and related controls used for transferring and metering thin and viscous liquids sold under the Viking and Wright Flow brands and air-operated double-diaphragm pumps sold under the Blagdon brand. Markets served by Viking products include chemical, petroleum, pulp and paper, plastics, paints, inks, tanker trucks, compressor, construction, food and beverage, personal care, pharmaceutical and biotech. Warren Rupp products (which also include Pumper Parts and Versa-Matic products) are used for abrasive and semisolid materials, as well as for applications where product degradation is a concern or where electricity is not available or should not be used. Markets served by Warren Rupp products include chemical, paint, food processing, electronics, construction, utilities, mining and industrial maintenance. CFP maintains operations in Kampen, Germany (Richter products), Cedar Falls, Iowa (Richter and Viking products), Eastbourne, East Sussex, England, Shannon, Ireland (Viking products) and Mansfield, Ohio (Warren Rupp products). CFP primarily uses independent distributors to market and sell its products. Approximately 54% of CFP�� sales during 2012 were to customers outside the United States.
Water consists of the Company�� ADS, IETG, iPEK, Knight and Pulsafeeder businesses. Water is a provider of metering technology and flow monitoring products and underground surveillance services for water and wastewater markets, as well as a manufacturer of pumps and dispensing equipment for industrial laundries! , commerc! ial dishwashing and chemical metering, and a provider of metering pumps, special-purpose rotary pumps, peristaltic pumps, fully integrated pump and metering systems, custom chemical-feed systems, electronic controls and dispensing equipment. ADS�� products and services provide integrated solutions that enable industry, municipalities and government agencies to analyze and measure the capacity, quality and integrity of wastewater collection systems, including the maintenance and construction of such systems. IETG�� products and services enable water companies to manage their water distribution and sewerage networks, while its surveillance service specializes in underground asset detection and mapping for utilities and other private companies. iPEK supplies remote controlled systems used for infrastructure inspection. Knight is a manufacturer of pumps and dispensing equipment for industrial laundries, commercial dishwashing and chemical metering. Pulsafeeder products are used to introduce precise amounts of fluids into processes to manage water quality and chemical composition, as well as peristaltic pumps. Its markets include water and wastewater treatment, oil and gas, power generation, pulp and paper, chemical and hydrocarbon processing, and swimming pools. Water maintains operations in Huntsville, Alabama and various other locations in the United States, Sydney, New South Wales, Australia and Melbourne, Victoria, Australia (ADS products), Leeds, England (IETG products and services), Hirschegg, Austria, and Sulzberg, Germany (iPEK products), Lake Forest, California, Mississauga, Ontario, Canada, Eastbourne, East Sussex, England, Unanderra, Australia, and Ciudad Juarez, Chihuahua, Mexico (Knight products), Rochester, New York, Punta Gorda, Florida and Milan, Italy (Pulsafeeder products). Approximately 47% of Water�� sales during 2012 were to customers outside the United States.
Water Services & Technology (WST) consists of the Company�� ADS, IETG and iPEK businesses. WST is a provi! der of me! tering technology and flow monitoring products and underground surveillance services for wastewater markets. ADS�� products and services provide integrated solutions that enable industry, municipalities and government agencies to analyze and measure the capacity, quality and integrity of wastewater collection systems, including the maintenance and construction of such systems. IETG�� products and services enable water companies to manage their water distribution and sewerage networks, while its surveillance service specializes in underground asset detection and mapping for utilities and other private companies. iPEK supplies remote controlled systems used for infrastructure inspection. WST maintains operations in Huntsville, Alabama and various other locations in the United States and Australia (ADS products and services); Leeds, England (IETG products and services); and Hirschegg, Austria, and Sulzberg, Germany (iPEK products). Approximately 40% of WST�� 2012 sales were to customers outside the United States.
The Company competes with Pump Solutions Group, Dover Corporation, Milton Roy and Tuthill Corporation.
Health & Science Technologies Segment
The Health & Science Technologies Segment designs, produces and distributes a range of precision fluidics, rotary lobe pumps, centrifugal and positive displacement pumps, roll compaction and drying systems used in beverage, food processing, pharmaceutical and cosmetics, pneumatic components and sealing solutions, including pumping solutions required in analytical instrumentation, clinical diagnostics and drug discovery, molded and extruded, biocompatible medical devices and implantables, air compressors used in medical, dental and industrial applications, optical components and coatings for applications in the fields of scientific research, defense, aerospace, telecommunications and electronics manufacturing, laboratory and commercial equipment used in the production of micro and nano scale materials, precision pho! tonic sol! utions used in life sciences, research and defense markets, and precision gear and peristaltic pump technologies. The segment accounted for 35% of IDEX�� sales and 35% of operating income in 2012, with approximately 54% of its sales to customers outside the United States.
IH&S consists of Eastern Plastics, Rheodyne, Ismatec, Sapphire Engineering, Upchurch Scientific and ERC, which was acquired in April 2012. IH&S has facilities in Rohnert Park, California (Rheodyne products); Bristol, Connecticut (Eastern Plastics products); Wertheim-Mondfeld, Germany (Ismatec products); Middleboro, Massachusetts (Sapphire Engineering products); Oak Harbor, Washington (Ismatec and Upchurch Scientific products); and Kawaguchi, Japan (ERC products). Eastern Plastics products, which consist of high- precision integrated fluidics and associated engineered plastics solutions, are used in a set of end markets including medical diagnostics, analytical instrumentation, and laboratory automation. Rheodyne products consist of injectors, valves, fittings and accessories for the analytical instrumentation market. Rheodyne products are used by manufacturers of high pressure liquid chromatography equipment servicing the pharmaceutical, biotech, life science, food & beverage, and chemical markets. Ismatec products include peristaltic metering pumps, analytical process controllers, and sample preparation systems. Sapphire Engineering and Upchurch Scientific products consist of fluidic components and systems for the analytical, biotech and diagnostic instrumentation markets, such as fittings, precision-dispensing pumps and valves, tubing and integrated tubing assemblies, filter sensors and other micro-fluidic and nano-fluidic components, as well as advanced column hardware and accessories for the high performance liquid chromatography (HPLC) market. Sapphire Engineering and Upchurch Scientific products primarily serve the pharmaceutical, drug discovery, chemical, biochemical processing, genomics/proteomics research, envir! onmental ! labs, food/agriculture, medical lab, personal care, and plastics/polymer/rubber production markets. ERC manufactures gas liquid separations and detection solutions for the life science, analytical instrumentation and clinical chemistry markets. ERC�� products consist of in-line membrane vacuum degassing solutions, refractive index detectors and ozone generation systems. Approximately 52% of IH&S�� 2012 sales were to customers outside the United States.
IOP consists of CVI Melles Griot (CVI MG), Semrock and AT Films (the Precision Photonics portion of the AT Films business was acquired in April 2012). CVI MG is a into design and manufacture of precision photonic solutions used in the life sciences, research, semiconductor, security and defense markets. CVI MG�� products are focused on the generation, control and productive use of light for a variety of key science and industrial applications. Products consist of specialty lasers and light sources, electro-optical components, specialty shutters, opto-mechanical assemblies and components. In addition, CVI MG produces critical components for life science research, electronics manufacturing, military and other industrial applications including lenses, mirrors, filters and polarizers. These components are utilized in a number of applications such as spectroscopy, cytometry (cell counting), guidance systems for target designation, remote sensing, menology and optical lithography.
CVI MG is headquartered in Albuquerque, New Mexico, with additional manufacturing sites located in Carlsbad, California; Rochester, New York; Isle of Man, British Isles; Leicester, England; Kyongki-Do, Korea; Tokyo, Japan; Didam, The Netherlands; and Singapore. Semrock is a provider of optical filters for biotech and analytical instrumentation in the life sciences markets. Semrock�� optical filters are produced using state-of-the-art manufacturing processes which enable it to offer its customers improvements in instrument performance and reliability.! Semrock ! is located in Rochester, New York. AT Films specializes in optical components and coatings for applications in the fields of scientific research, defense, aerospace, telecommunications and electronics manufacturing. The Precision Photonics portion of its business specializes in optical components and coatings for applications in the fields of scientific research, aerospace, telecommunications and electronics manufacturing. AT Films is headquartered in Boulder, Colorado. Approximately 57% of IOP�� 2012 sales were to customers outside the United Sates.
Containment consists of Precision Polymer Engineering (PPE). PPE, which is located in Blackburn, England, is a provider of high performance seals and advanced sealing solutions for a diverse range of global industries and applications, including hazardous duty, analytical instrumentation, semiconductor/solar, process technologies, pharmaceutical, electronics, and food applications. Approximately 79% of PPE�� 2012 sales were to customers outside the United States.
Gast consists of the Company�� Gast and Jun-Air businesses. The Gast business is a manufacturer of air-moving products, including air motors, low-range and medium-range vacuum pumps, vacuum generators, regenerative blowers and fractional horsepower compressors. Gast products are used in a variety of long-life applications requiring a quiet, clean source of moderate vacuum or pressure. Gast products primarily serve the medical equipment, environmental equipment, computers and electronics, printing machinery, paint mixing machinery, packaging machinery, graphic arts, and industrial manufacturing markets. The Jun-Air business is a provider of low-decibel, ultra-quiet vacuum compressors suitable for medical, dental and laboratory applications. Based in Benton Harbor, Michigan, Gast also has a logistics and commercial center in Redditch, England. Approximately 27% of Gast�� 2012 sales were to customers outside the United States.
Micropump, headquartered i! n Vancouv! er, Washington, produces, precision-engineered, magnetically and electromagnetically driven rotary gear, piston and centrifugal pumps. Micropump products are used in low-flow abrasive and corrosive applications. Micropump products primarily serve the printing machinery, medical equipment, paints and inks, chemical processing, pharmaceutical, refining, laboratory, electronics, pulp and paper, water treatment, textiles, peristaltic metering pumps, analytical process controllers and sample preparation systems markets. Approximately 77% of Micropump�� 2012 sales were to customers outside the United States.
MPT consists of Quadro, Fitzpatrick, Microfluidics and Matcon Group Limited (Matcon), which was acquired in July 2012. Quadro is a provider of particle control solutions for the pharmaceutical and bio-pharmaceutical markets. Based in Waterloo, Ontario, Canada, Quadro�� activities include fine milling, emulsification and special handling of liquid and solid particulates for laboratory, pilot phase and production scale processing within the pharmaceutical and bio-pharmaceutical markets. Fitzpatrick is into the design and manufacture of process technologies for the pharmaceutical, food and personal care markets. Fitzpatrick designs and manufactures customized size reduction, roll compaction and drying systems to support their customers��product development and manufacturing processes. Fitzpatrick is headquartered in Elmhurst, Illinois. Microfluidics is into designing and manufacturing of laboratory and commercial equipment used in the production of micro and nano scale materials for the pharmaceutical and chemical markets. Microfluidics is the producer of the Microfluidizer family of high shear fluid processors for uniform particle size reduction, robust cell disruption and nanoparticle creation. Microfluidics has offices in Newton, Massachusetts. Matcon is into material processing solutions for high value powders used in the manufacture of pharmaceuticals, food, plastics, and fine chemic! als.
!Matcon�� products consist of the original cone valve powder discharge system and filling, mixing and packaging systems, all of which support its customers��automation and process requirements. Matcon is located in Evesham, Worcestershire, England. Approximately 61% of MPT�� 2012 sales were to customers outside the United States.
The Company competes with Gardner Denver, Inc., Thermo Scientific Dionex, Gooch & Housego PLC, Parker Hannifin and Valco Instruments Co., Inc.
Fire & Safety/Diversified Products Segment
The Fire & Safety/Diversified Products segment produces firefighting pumps and controls, rescue tools, lifting bags and other components and systems for the fire and rescue industry, engineered stainless steel banding and clamping devices used in a variety of industrial and commercial applications, and precision equipment for dispensing, metering and mixing colorants and paints used in a variety of retail and commercial businesses around the world. The segment accounted for 22% of IDEX�� sales and 53% of IDEX�� operating income in 2012, with approximately 56% of its sales to customers outside the United States.
Fire Suppression consists of the Company�� Class I, Hale and Godiva businesses, which produce truck-mounted and portable fire pumps, stainless steel valves, foam and compressed air foam systems, pump modules and pump kits, electronic controls and information systems, conventional and networked electrical systems, and mechanical components for the fire, rescue and specialty vehicle markets. Fire Suppression�� customers are primarily OEMs. Fire Suppression is headquartered in Ocala, Florida (Class 1 and Hale products), with additional facilities located in Warwick, England (Godiva products). Approximately 41% of Fire Suppression�� 2012 sales were to customers outside the United States.
Rescue consists of the Company�� Dinglee, Hurst Jaws of Life, Lukas and Vetter businesses, which produce hydraulic! , battery! , gas and electric-operated rescue equipment, hydraulic re-railing equipment, hydraulic tools for industrial applications, recycling cutters, pneumatic lifting and sealing bags for vehicle and aircraft rescue, environmental protection and disaster control, and shoring equipment for vehicular or structural collapse. Rescue Tool�� customers are primarily public and private fire and rescue organizations. Rescue has facilities in Shelby, North Carolina (Hurst Jaws of Life products); Tianjin, China (Dinglee products); Erlangen, Germany (Lukas products); and Zulpich, Germany (Vetter products). Approximately 75% of Rescue�� 2012 sales were to customers outside the United States.
Band-It is a producer of stainless steel banding, buckles and clamping systems. Band-It products are used for securing exhaust system heat and sound shields, industrial hose fittings, traffic signs and signals, electrical cable shielding, identification and bundling, and in numerous other industrial and commercial applications. Band-It products primarily serve the automotive, transportation equipment, oil and gas, general industrial maintenance, electronics, electrical, communications, aerospace, utility, municipal and subsea marine markets. Band-It is based in Denver, Colorado, with additional operations in Staveley, Derbyshire, England, and a IDEX shared manufacturing facility in China. Approximately 39% of Band-It�� 2012 sales were to customers outside the United States.
Dispensing Equipment produces precision equipment for dispensing, metering and mixing colorants and paints used in a variety of retail and commercial businesses worldwide. Dispensing Equipment is a global supplier of precision-designed tinting, mixing, dispensing and measuring equipment for auto refinishing and architectural paints. Dispensing Equipment products are used in retail and commercial stores, hardware stores, home centers, department stores, automotive body shops as well as point-of-purchase dispensers. Dispensing Equipmen! t is head! quartered in Wheeling, Illinois with additional facilities in Sassenheim, The Netherlands; Unanderra, Australia; and Milan, Italy, as well as IDEX shared manufacturing facilities in India and China. Approximately 59% of Dispensing Equipment�� 2012 sales were to customers outside the United States.
The Company competes with American Cast Iron Pipe Company, Holmatro, Inc., Nordic Capital and Panduit Corporation.
Advisors' Opinion:- [By Ben Levisohn]
Xylem’s big day has also boosted other water-infrastructure stocks. Flowserve (FLS) has gained 1.2% to $70.59, Idex Corp. (IEX) has risen 0.5% to $68.69 and Thermo Fisher Scientific (TMO) has advanced 0.4% t0 $98.22.
- [By Seth Jayson]
Calling all cash flows
When you are trying to buy the market's best stocks, it's worth checking up on your companies' free cash flow once a quarter or so, to see whether it bears any relationship to the net income in the headlines. That's what we do with this series. Today, we're checking in on IDEX (NYSE: IEX ) , whose recent revenue and earnings are plotted below. - [By Damon Churchwell]
Lastly, a growth company�
The third example of a thriving flow technologies company is IDEX� (NYSE: IEX ) . This one is situated in a unique set of end markets, namely fluid & metering, health & science, and fire & safety/diversified. - [By Marc Bastow]
This week’s biggest increase came from applied solutions provider Idex (IEX), which �raised its quarterly dividend 22% to 23 cents per share payable April 30 to shareholders of record April 16.
IEX Dividend Yield: 1.60%
Top 10 Machinery Stocks To Invest In Right Now: CNH Industrial NV (CNHI)
CNH Industrial NV is a Netherlands-based company primarily engaged in the manufacture of heavy machinery and vehicles equipment. It divides its activities into four main businesses. The Agricultural Equipment offers agricultural equipment under the New Holland Agriculture, Case IH brands and the Steyr brand. The Construction Equipment produces excavators, bulldozers, backhoes, compactors and other construction equipment under the New Holland Construction and Case Construction Equipment brands. The Trucks & Commercial Vehicles manufactures trucks and a commercial vehicles, including buses, coaches and special vehicles under Iveco, Iveco Bus and Heuliez Bus brands, as well as it produces quarry and mining equipment through Iveco Astra, and fire fighting vehicles through the Iveco Magirus brand. The Powertrain offers transmission systems, engines for marine application and power generation through FPT Industrial brand. Advisors' Opinion:- [By Lisa Levin]
CNH Industrial NV (NYSE: CNHI) shares tumbled 2.47% to reach a new 52-week low of $11.44. CNH Industrial reported an 11% drop in its third-quarter profit.
- [By GuruFocus]
According to GuruFocus list of 52-week lows, these Guru stocks have reached their 52-week lows.Deutsche Bank AG (DB) Reached the 52-Week Low of $36.04The prices of Deutsche Bank AG (DB) shares have declined to close to the 52-week low of $36.04, which is 36.1% off the 52-week high of $54.49. Deutsche Bank AG is owned by 3 Gurus we are tracking. Among them, 2 have added to their positions during the past quarter. 1 reduced their position.Deutsche Bank Aktiengesellschaft is a stock corporation organized under the laws of Germany. Deutsche Bank Ag has a market cap of $36.74 billion; its shares were traded at around $36.04 with a P/E ratio of 413.90 and P/S ratio of 0.90. The dividend yield of Deutsche Bank Ag stocks is 2.10%.David Dreman (Trades, Portfolio) owns 58,725 shares as of 03/31/2014, an increase of 404.64% from the previous quarter. This position accounts for 0.2% of the $1.29 billion portfolio of Dreman Value Management. Mario Gabelli (Trades, Portfolio) owns 6,250 shares as of 03/31/2014, which accounts for 0.0015% of the $18.53 billion portfolio of GAMCO Investors.Ross Stores Inc (ROST) Reached the 52-Week Low of $67.16The prices of Ross Stores Inc (ROST) shares have declined to close to the 52-week low of $67.16, which is 21.2% off the 52-week high of $81.99. Ross Stores Inc is owned by 14 Gurus we are tracking. Among them, 7 have added to their positions during the past quarter. 5 reduced their positions.Ross Stores, Inc., is a Delaware Corporation. It turned public with its IPO in August 1985. Ross Stores Inc has a market cap of $14.21 billion; its shares were traded at around $67.16 with a P/E ratio of 17.00 and P/S ratio of 1.39. The dividend yield of Ross Stores Inc stocks is 1.10%. Ross Stores Inc had an annual average earnings growth of 23.20% over the past 10 years. GuruFocus rated Ross Stores Inc the business predictability rank of 4.5-star.ROST recently reported earnings per share for the 13 weeks ended May 3, 2014 of $1.15, up from $1.07 fo
- [By Holly LaFon]
The largest detractor for the quarter was CNH Industrial (CNHI), a global agricultural and construction equipment manufacturer, which fell 11%.� CNH released its nine-month results, which showed revenue growth of 0.6%, but the company�� margins were adversely affected by Iveco, its trucks and commercial vehicles segment.� Iveco�� margins fell short of expectations due to tough pricing, high launch costs, negative mix and increases in bad debt provisions.� Management maintains full-year guidance of 3-4% revenue growth.� We believe improvements in the Iveco division will help CNH Industrial achieve its long-term margin targets.�
Top 10 Machinery Stocks To Invest In Right Now: Danieli & C Officine Meccaniche SpA (DAS)
Danieli & C Officine Meccaniche SpA is an Italy-based company primarily engaged in industrial sector. The Company designs, manufactures, sales and makes installation of machines and plants for the metallurgical industry. The Company's portfolio includes mines; pellet production plants; blast furnaces; direct reduction equipment; machinery for the treatment of scrap metal; steelworks for production of liquid steel; continuous casting machinery for blooms, billets and slabs; rolling mills for long products, seamless tubes and flat products; production lines for welded tubes and flat products; plants for secondary processing, such as peeling, rolling and drawing; forging presses and manipulators; extrusion presses for ferrous and non-ferrous metals; plants for longitudinal and transversal cutting; automation and control systems, and cranes and lifting equipment. It is also active in the production and sale of special steel for automotive, machine tools and railway industry, among others. Advisors' Opinion:- [By GURUFOCUS]
EMC�� products ��both hardware and software - are litearlly a geek�� wonderland alphabet soup, which include Storage Area Network (SAN), Network Attached Storage (NAS), Direct Attached Storage (DAS), Virtual SAN, All-Flash XtremIO, Atmos, Avamar, �Data Domain, Isilon, Pivotal, ViPR Software Defined Storgae, VMAX, VNX, VNXe, VPLEX, VSPEX (none of these are typos).� Information storage makes up 70% of revenues and virtualization 23% of revenues.� Products generate 55% of revenues.� Services generate 45% of revenues.� The Company�� gross profit split is approximaltey 67% data storage and 31% virtualization.
- [By Damian Illia]
Crown Castle has acquired recently the privately held company NextG Networks Inc., largest provider of outdoor Distributed Antenna Systems (DAS), with more than 7,000 DAS plus another 1,500 nodes in the pipeline, and over 4,600 miles fiber-optic cable�� transmission rights. Through this addition, the company has improved greatly its DAS network across 26 United States metropolitan areas. As NextG has only 1.7 tenants per network on an average and thus underutilizing its capacity, Crown Castle will increase customers with no integration and rearrangement costs. Another company�� big move was the acquisition of 9,700 wireless towers from AT&T Inc. (T) Located in the top 100 markets in the U. S. T-Mobile is likely to maintain its infrastructure in these towers for the next 10 years. On top of all, the recent conversion of business into a REIT has represented long term benefits for the company in terms of tax savings and enhancing shareholders��wealth.
Top 10 Machinery Stocks To Invest In Right Now: Emak SpA (EM)
Emak SpA is an Italy-based company primarily engaged in the manufacture of outdoor power equipment for gardening, forestry, agriculture and industry. The Company�� portfolio includes chainsaws, brush cutters, lawnmowers, garden tractors, water pumps, high pressure washers, transporters, rotary cultivators, motor hoes and power cutters, among others. It also manufactures spare parts, accessories and protective clothing. The Company sells its products under various brand names, such as Oleo-Mac, Efco, Bertolini, Nibbi and Staub. Emak SpA directly manages distribution in the Italian market and it sells products, through its commercial subsidiaries, in France, Germany, the United Kingdom, Spain, the countries of Benelux, Poland, Ukraine, among others.The Company is controlled by Yama SpA, which is an industrial holding company. Advisors' Opinion:- [By Federico Zaldua]
Brookfield Infrastructure has a number of potentially profitable areas for investment around the world but, above all, in infrastructure hungry Emerging Markets (EM) such as Brazil. According to Credit Suisse analysts, in Brazil, funds can be invested at Funds From Operations (FFO) yields above 12%. Therefore, the company's ability to grow its distribution yield, whether through acquisitions or organically, is critical to evaluate the company's value. Moreover, the currently conservative dividend payout ratio should allow Brookfield Infrastructure to self-finance on going opportunities.
Top 10 Machinery Stocks To Invest In Right Now: Chart Industries Inc (GTLS)
Chart Industries, Inc., incorporated on June 25, 1992, is an independent global manufacturer of engineered equipment used in the production, storage and end-use of hydrocarbon and industrial gases. The Company supplies engineered equipment used throughout the global liquid gas supply chain. It operates in three segments: energy and chemicals (E&C), distribution and storage or (D&S), and biomedical. The E&C and D&S segments manufacture products used primarily in energy-related and general industrial applications, such as the separation, liquefaction, distribution and storage of hydrocarbon and industrial gases. Through its BioMedical segment, it supplies cryogenic and other equipment used in the storage and distribution of biological materials and oxygen, used primarily in the medical, biological research and animal breeding industries.
The Company�� products, including vacuum insulated containment vessels, heat exchangers, cold boxes and other cryogenic components, are used throughout the liquid gas supply chain for the purification, liquefaction, distribution, storage and end-use of hydrocarbon and industrial gases. It is a manufacturer of standard and engineered equipment primarily used for low-temperature and cryogenic applications. The Company�� primary customers are multinational producers and distributors of hydrocarbon and industrial gases and their suppliers. The Company sells its products and services to more than 2,000 customers worldwide.
Energy and Chemicals Segment
The Company is a designer and manufacturer of cryogenic brazed aluminum and air cooled heat exchangers. The Company�� brazed aluminum heat exchangers are incorporated into assemblies and cold boxes to facilitate the progressive cooling and liquefaction of air or hydrocarbon mixtures for the subsequent recovery or purification of component gases. In hydrocarbon processing industries, its brazed aluminum heat exchangers allow producers to obtain purified hydrocarbon by-products, such ! as methane, ethane, propane and ethylene, which are commercially marketable for various industrial or residential uses. In the industrial gas market, its brazed aluminum heat exchangers are used to produce high purity atmospheric gases, such as oxygen, nitrogen and argon, which have diverse industrial applications. The Company�� air cooled heat exchangers are used in multiple markets to cool fluids to allow for further processing or to provide condensing of fluids, including hydrocarbon, petrochemical, natural gas processing, and power generation. Its compact Core-in-Kettle heat exchangers are designed to replace shell-and-tube exchangers, offering significantly more heat transfer surface per unit volume and improving the efficiency of chillers, vaporizers, reboilers and condensers in hydrocarbon applications including ethylene, propylene and LNG.
The Company is a designer and fabricator of cold boxes. Cold boxes are engineered systems used to reduce the temperature of gas mixtures to the point where component gases liquefy and can be separated and purified for further use in multiple industrial, scientific and commercial applications. In the hydrocarbon processing industry, its cold box systems are used in natural gas processing and in the petrochemical industry. In the industrial gas industry, cold box systems are used to separate air into its atmospheric components, including nitrogen, oxygen and argon, where the gases are used in a diverse range of applications, such as metal production and heat treating, enhanced oil and gas production, coal gasification, chemical and oil refining, the quick-freezing of food, wastewater treatment and industrial welding. The construction of a cold box system generally consists of one or more brazed aluminum heat exchangers and other equipment packaged in a box consisting of a structural metal frame encasing a complex system of piping, valves and instrumentation.
The Company designs and manufactures of engineered hydrocarbon process syst! ems speci! fically for those markets requiring cryogenic processing technology. These Concept-to-Reality process systems incorporate many of Chart�� core products, including brazed aluminum heat exchangers, Core-in-Kettles, cold boxes, vessels, pipe work and air cooled heat exchangers. These systems are used for global LNG projects, including projects in the United States and China for both domestic LNG production for diesel displacement and in the conversion of LNG import terminals to export terminals, and also for use in global nitrogen rejection units (NRU) and propane dehydrogenation (PDH).
Distribution and Storage Segment
The Company is a supplier of cryogenic equipment to the global bulk and packaged industrial gas industry as well as for energy-related applications. Its products span the entire spectrum of industrial gas demand from small customers requiring cryogenic packaged gases to large users requiring custom engineered cryogenic storage systems. Its products in the D&S segment include Cryogenic Bulk Storage Systems, Cryogenic Packaged Gas Systems, Cryogenic Systems and Components, LNG Applications, Beverage Liquid CO2 Systems, and Cryogenic Services. The Company is a supplier of cryogenic bulk storage systems (stationary tanks, trailers, and ISO tanks) of various sizes ranging from 500 gallons to 250,000 gallons. End use customers for its cryogenic storage equipment include industrial gas producers and distributors, chemical producers, manufacturers of electrical components, health care organizations, food processors and businesses in the oil and natural gas industries.
The Company is supplier of cryogenic packaged gas systems of various sizes ranging from 160 liters to 3,000 liters. Cryogenic liquid cylinders are used extensively in the packaged gas industry to allow smaller quantities of liquid to be easily delivered to the customers of industrial gas distributors on a full-for-empty or fill-on-site basis. Principal customers for its liquid cylinders are th! e same gl! obal industrial gas producers and the North American industrial gas distributors who purchase its cryogenic bulk storage systems. It has developed two technologies in the packaged gas product area: ORCA Micro-Bulk systems and Tri-fecta Laser Gas assist systems. ORCA Micro-Bulk systems bring the ease of use and distribution economics of bulk gas supply to customers formerly supplied by high pressure or cryogenic liquid cylinders. The Tri-fecta Laser Gas assist system was developed to meet the assist gas performance requirements for new high powered lasers being used in the metal fabrication industry. The Company�� line of cryogenic components, including VIP, engineered bulk gas installations, specialty liquid nitrogen (LN2), end-use equipment and cryogenic flow meters are recognized in the market for their reliability, quality and performance. These products are sold to industrial gas producers, as well as to a diverse group of distributors, resellers and end users.
The Company supplies cryogenic solutions for the storage, distribution, vaporization, and application of LNG. LNG may be utilized as a primary source of heat or power at industrial or residential complexes located away from a natural gas pipeline. LNG may also be used for peak shaving or as a backup supply at remote locations. It refers to its LNG distribution products as a Virtual Pipeline as the natural gas pipeline is replaced with cryogenic distribution to deliver the gas to the end user. It supplies cryogenic trailers, bulk storage tanks, tap-off facilities, and vaporization equipment specially configured for LNG into Virtual Pipeline applications. LNG may also be used as a fuel to power vehicles or ships. The Beverage Liquid CO2 Systems product line consists primarily of vacuum insulated, bulk liquid CO2 containers used for beverage carbonation in restaurants, convenience stores and cinemas, in sizes ranging from 100 pounds to 750 pounds of liquid CO2 storage. It also manufactures and market non-insulated, bulk fountain ! syrup con! tainers for side-by-side installation with its CO2 systems. Its beverage systems are sold to national restaurant chains, soft drink companies and CO2 distributors. Its primary competitors for bulk liquid CO2 beverage delivery systems are Taylor-Wharton and other producers of high-pressure gaseous CO2 cylinders. The Company operates locations in the United States and Europe providing installation, service, repair and maintenance of cryogenic products, including storage tanks, liquid cylinders, cryogenic trailers, cryogenic railcars, cryogenic pumps, cryogenic flow meters and VIP.
BioMedical Segment
The Company�� BioMedical segment consists of various product lines built around its core competencies in cryogenics and pressure swing adsorption, but with a focus on the respiratory and biological users of the liquids and gases instead of the large producers and distributors of cryogenic liquids. Its products in the BioMedical segment include Respiratory Products, Cold Storage Systems, and Commercial Oxygen Generation Systems. Its respiratory oxygen product line consists of a range of medical respiratory products, including liquid oxygen systems and ambulatory oxygen systems, both of which are used primarily for the in-home supplemental oxygen treatment of patients with chronic obstructive pulmonary diseases, such as bronchitis, emphysema and asthma.
The Cold Storage Systems product line consists of vacuum insulated containment vessels for the storage of biological materials. The primary applications for this product line include medical laboratories, biotech/pharmaceutical, research facilities, blood and tissue banks, veterinary laboratories, large-scale repositories and artificial insemination, particularly in the beef and dairy industry.
The Company competes with Linde, Sumitomo, Kobe, Fives, Linde, Air Products, Praxair, Air Liquide, Taylor-Wharton International or Taylor-Wharton and CVA/INOX, Taylor-Wharton and Beijing Tenhai Industrial Cylinders, Acme Cr! yogenics,! Vacuum Barrier Corporation, and Ind-Burma Petroleum Company.
Advisors' Opinion:- [By Marc Courtenay]
Chart Industries (GTLS), which reports earnings on April 22nd, has been bandied about for months as a takeover target. It manufactures and supplies engineered equipment used in the production, storage, and end-use of hydrocarbon and industrial gases in the United States, the Czech Republic, China, Germany, and internationally.
Top 10 Machinery Stocks To Invest In Right Now: Colfax Corp (CFX)
Colfax Corporation (Colfax) is a global industrial manufacturing and engineering company. The Company provides gas- and fluid-handling and fabrication technology products and services to commercial and governmental customers worldwide under the Howden and ESAB brand names and by Colfax Fluid Handling. Colfax�� products are marketed principally under the brand names Allweiler, Baric, Fairmount Automation, Houttuin, Imo, LSC, COT-Puritech, Portland Valve, Tushaco, Warren and Zenith. The Company has production facilities in Europe, North America and Asia. It offers customized fluid handling solutions to meet individual customer needs. In February 2011, the Company acquired Rosscor Holding B.V. In December 2011, it acquired COT-PURITECH. On January 13, 2012, Colfax acquired Charter International plc. In May 2012, the Company acquired 91% interest in Soldex S.A.
Pumps
Colfax manufactures rotary positive displacement pumps. Its rotary positive displacement pumps consist of a casing containing screws, gears, vanes or similar components that are actuated by the relative rotation of that component to the casing, which results in the physical movement of the liquid from the inlet to the discharge at a constant rate.
Fluid Handling Systems
The Company manufactures fluid handling systems used primarily in the oil and gas, power generation, commercial marine and global defense markets. Colfax offers turnkey systems and support, including design, manufacture, installation, commission and service. Its systems include lubrication systems, which are used in rotating equipment in oil refineries and other process industries; custom designed packages used in crude oil pipeline applications; lubrication and fuel forwarding systems used in power generation turbines; packages for commercial marine engine rooms, and fire suppression systems for navy applications. Howden�� primary products are heavy-duty fans, rotary heat exchangers and compressors. The fans and heat! exchangers are used in coal-fired power stations, both in combustion and emissions control applications, underground mines, steel sintering plants and other industrial facilities. It design, manufacture and distribute fluid-handling products that transfer or control liquids in a range of applications.
Specialty Valves
The Company�� specialty valves are used primarily in naval applications. Its valve business has specialized machining, welding and fabrication capabilities that enable the Company to serve as a contractor to the United States Navy. In addition to designing and manufacturing valves, Colfax also offers repair and retrofit services for products manufactured by other valve suppliers through its aftermarket support centers located in Portland, Maine and San Diego, California.
Advisors' Opinion:- [By Holly LaFon]
In the fourth quarter, he bought 32 new stocks. The largest new buys are: Air Lease (AL), Colfax (CFX) and Republic Bancorp Inc. (RBCAA).
Air Lease (AL)
- [By Vera Yuan]
Colfax (CFX) is a multi-platform industrial engineering and manufacturing company with a focus on two product areas: (1) gas & fluid handling, and (2) welding. The company was founded in 1995 by Steven and Mitchell Rales, best known as the founders of Danaher Corporation, and it has grown to its current size through a combination of acquisitions and organic growth. In 2012, Colfax completed the transformative acquisition of Charter International PLC, a UK-based industrial conglomerate many times its size, increasing revenues overnight from $700 million to $4 billion.
- [By GuruFocus]
George Soros (Trades, Portfolio) just reported his first quarter portfolio. He buys Citrix Systems Inc, Baker Hughes Inc, Comcast Corp, Spansion Inc, etc during the 3-months ended 03/31/2014, according to the most recent filings of his investment company, Soros Fund Management LLC. As of 03/31/2014, Soros Fund Management LLC owns 305 stocks with a total value of $10.1 billion. These are the details of the buys and sells.New Purchases: BHI, CODE, CTRP, CLI, AVB, COMM, CNQ, AGO, AUY, ATML, ASH, BXMT, CSTM, AEM, CMA, ARE, CHKP, AUQ, BEAV, CX, ADSK, AALCP, BLK, AIG, BIIB, ADEP, AMRI, ARWR, ATHX, BALT, BCRX, BEAT, CFX, CLFD, CUR, CODE,Added Positions: CTXS, CMCSA, CNP, ALTR, BRCD, CBS, CRM, CHTR, CCJ, CIEN, BIDU, ALLE, ABT, CDNS, ACT,Reduced Positions: AAPL, CCI, AMT, ABBV, AAL, BITA, AL, ANGI, ARIA, CBST, BA, BIRT, EXAR,Sold Out: C, BAC, CRI, AMZN, AGN, CF, BRCM, COTY, BMY, AMCX, CAR, A, ADBE, AFL,For the details of George Soros (Trades, Portfolio)'s stock buys and sells, go to http://www.gurufocus.com/StockBuy.php?GuruName=George+SorosThis is the sector weightings of his portfolio:Technology18.9%Energy14%Healthcare8.3%Consumer Defensive8.2%Communication Services8.1%Consumer Cyclical5.4%Industrials5.1%Basic Materials4.9%Financial Services2.5%Real Estate1.9%Utilities0.5%These are the top 5 holdings of George Soros (Trades, Portfolio)1. Teva Pharmaceutical Industries Ltd (TEVA) - 10,310,041 shares, 5.4% of the total portfolio. Shares added by 10.67%2. Herbalife Ltd (HLF) - 4,901,337 shares, 2.8% of the total portfolio. Shares added by 52.9%3. EQT Corp (EQT) - 2,573,814 shares, 2.5% of the total portfolio. Shares added by 3.27%4. Adecoagro SA (AGRO) - 25,915,076 shares, 2.1% of the total portfolio.5. Halliburton Co (HAL) - 3,596,353 shares, 2.1% of the total portfolio. Shares reduced by 20.73%New Purchase: Baker Hughes Inc (BHI)George Soros (Trades, Portfolio) initiated holdings in Baker Hughes Inc. His purchase prices were between $51.82 and $65.27, with an estimated
